ecoAID® is an underground modular stormwater management system used to detain, infiltrate or harvest stormwater run-off and also provides stormwater treatment by utilising an internal gross pollutant and sediment trap via a designated inlet row called a ‘Catch-All-Row” (C-A-R). The dual function of stormwater collection and treatment allows the engineer to optimise their drainage layout by minimising the number of external manhole pits required on-site with the added benefit of omitting any need for upstream gross pollutant and sediment traps.

The ecoAID® chamber system can form part of a treatment train providing primary treatment through the removal of gross pollutants, course and fine sediments via physical screening, sedimentation and filtration techniques.  

ecoAID® is exceptionally strong and robust water storage and treatment system that is designed to be used under public roads and highways, car parks, sports fields and public open space providing the engineer with opportunities to save valuable land space and protect our natural waterways from the damaging effects of pollution from new and existing developments.

The ecoAID® system is manufactured in Australia, making it a cost-effective alternative to imported systems whilst providing the customer with shorter lead times to site and also supporting the local economy by boosting the Australian manufacturing industry.

Gross Pollutant & Sediment Control

ecoAID® utilises a proprietary system called a “Catch-All-Row”. The system:

  • Captures 100% of gross pollutants
  • Captures a high percentage of silt and sediments down to 110 microns
  • Removes a high proportion of Total Suspended Solids (TSS), Total Petroleum Hydrocarbons (TPH) and Phosphorous (TP) 
  • Is easy to clean and maintain
  • The “Catch-All-Row” allows for rapid stormwater ex-filtration through slots punched into the bottom of each corrugation per chamber
  • The “Catch-All-Row”  utilises Geofabrics high quality and proven bidim® non-woven geotextiles for filtration and separation
  • Can be configured as a single or dual “Catch-All-Row” depending on the level of treatment required


ecoAID® has been used throughout Australia on many types of projects, including:

  • High-end commercial developments
  • Residential and sub-division
  • Local and State government projects including schools and hospitals
  • New sports fields for water harvesting
  • Drainage under public roads
  • Open sump conversions into Public Open Space (POS)


  • Australian made
  • ecoAID® has been designed, manufactured and tested in accordance with ASTM F2787.
  • ecoAID® has been designed to AS 5100.2 Australian Bridge Design Wheel Loads.
  • ecoAID® is very quick and easy to install with each chamber weighing only 15kg.
  • The system can be lined with an impermeable membrane for detention and harvesting applications.
  • ecoAID® can be installed in a single or double-layer configuration.
  • The modular system is infinitely scalable.


ecoAID®’s lightweight chambers and end caps means easy and rapid installation on site. Please see ecoAID® Installation Guidelines for further details.


Latest Projects

Friday, 17 April 2020 - 9:15am
Monday, 9 September 2019 - 11:00am
Thursday, 5 October 2017 - 5:30pm